UltraStock® MR50+FREE MDF is a high-performance panel with no added formaldehyde resins.
|Thickness||1/4" - 1 5/16”|
|Widths||To five feet|
|Lengths||To sixteen feet|
|Minimum Panel Averages1||1/4 - < 1/2"3||1/2" - 3/4"||> 3/4"|
|IB-Internal Bond, psi||120||110||90|
|Face Screwholding, lbs.||250||270||270|
|Edge Screwholding, lbs.2||NA||250||250|
|24-Hour Thickness Swell||10%||7%||4%|
1. One-panel minimum average per ANSI 208.2
2. Edge screw pull for less than 5/8" not applicable
3. ASTM D1037-06-PART B for <9.5mm (0.375")
|Length & Width||± 1/16"|
|Squareness||1/64" per foot of length|
|Straightness||1/64" per 2 feet of length|
|Thickness (within panel)||± 0.005"|
|Thickness (panel to panel)||± 0.005"|
|Recycled Content||MR credit 4||Awards 1 or 2 points for using products with recycled content that constitute at least 10% or 20%, based on cost, of the total value of project materials.|
|Regional Materials||MR credit 5||Awards 1 or 2 points for using materials on a project that are extracted and manufactured within 500 miles that constitute at least 10% or 20%, based on cost, of the total value of project materials.|
|Environmental Quality||EQ credit 4.4||Composite wood panels on the project shall contain no urea formaldehyde resins.|
|Low-VOC Emmitting Materials||G2.9||Specifies architects to select low-VOC emitting materials.|
|National Green Building Standard||Credits||Description|
|Pre-Consumer Recycled Content||604.1(2)||Use recycled content products in major areas such as walls, floor, insulation and roofing.|
|FSC® Certification||606.2(3)||Wood or wood-based products available that are certified by Forest Stewardship Council™.|
|Other Certification||606.2(6)||Wood-based components certified in accordance to CPA ECC 4-11.|
|Low Formaldehyde/VOC Emissions||901.4(a)||In compliance with ANSI A208.1.|
|Low Formaldehyde/VOC Emissions||901.4(c)||In compliance with CPA ECC 4-11.|
|Low Formaldehyde/VOC Emissions||901.4(d)||Composite wood contains no urea formaldehyde.|
|California Air Resource Board||C.A.R.B.||In compliance with CARB phase 2 requirements.|
Georgia-Pacific offers a choice of product solutions to meet customer design challenges: TemStock S™ Particleboard, TemStock W™ and TemStock B™ Particleboards are value engineered to produce premium results based on the qualities of Strength, Weight and Balance.
UltraStock MDF offers a specialized selection of panels designed for machinability, performance and weight. Enhanced options also deliver moisture protection and a product with no added formaldehyde resins.
The smooth, consistent face of UltraStock Select MDF is designed for RTF Cabinet Door and other critical machining applications.
UltraStock Premium MDF combines refined fiber resources and proven production processes to produce virtually defect-free panels needed for high-volume performance.
Outstanding machinability and top-quality finishing characteristics you expect from UltraStock MDF, but with less product weight.
UltraStock MR MDF delivers test-proven thickness-swell resistance that is 30-50 percent better than untreated panels.
UltraStock FREE MDF offers the perfect combination of performance and environmental protection.
UltraStock MR+FREE MDF offers the perfect combination of performance and environmental protection.
Shelving manufactured with Georgia-Pacific particleboard or MDF is designed for compatibility with a wide range of easily available shelf brackets and supports.