Georgia-Pacific Building Produts

Wood Products / Composite Panels / Particleboard and MDF

Shelving

Shelving manufactured with Georgia-Pacific particleboard or MDF is designed for compatibility with a wide range of easily available shelf brackets and supports.

  • Pre-cut in three popular widths and four lengths
  • Produced raw, ideal for painting or laminating
  • Square or bull-nosed
  • Cost efficient, easy to install and durable

Details

Shelving manufactured with Georgia-Pacific particleboard or MDF is designed for compatibility with a wide range of easily available shelf brackets and supports.

  • Pre-cut in three popular widths and four lengths
  • Produced raw, ideal for painting or laminating
  • Square or bull-nosed
  • Cost efficient, easy to install and durable

Applications

Wherever storage is needed, including the pantry, garage, bedroom and study

Dimensions

Thickness 1/4" - 1-1/8”
Panel Sizes 49” & 61” x 73”-169”
Press Sizes 4' x 24', 9' x 25'

Physical Properties

Thickness 3/4"
Lengths 4', 6', 8' & 12'
Widths 12", 16", 24"*
Edge Square and Bullnose
Bundles 4' wide, 2' high

*Actual sizes are 1/2" under. Custom sizes available with appropriate lead time and volume.

Tolerances

Length & Width ± 1/16"
Squareness ≤ 1/8"
Straightness 1/64" per 2 feet of length
Thickness (within panel) ± 0.004"
Thickness (panel to panel) ± 0.004"

Storage

Store engineered wood shelving flat, in a dry location and avoid direct contact with the ground.

Shipping Information

Unitized and strapped to risers and protected from strapping damage. Shipments may be made in truck or rail.

Environmental Credits

LEED Credit Description
Recycled Content MR credit 4 Awards 1 or 2 points for using products with recycled content that constitute at least 10% or 20%, based on cost, of the total value of project materials.
Regional Materials MR credit 5 Awards 1 or 2 points for using materials on a project that are extracted and manufactured within 500 miles that constitute at least 10% or 20%, based on cost, of the total value of project materials.

National Green Building Standard Credits Description
Pre-Consumer Recycled Content 604.1(2) Use recycled content products in major areas such as walls, floor, insulation and roofing.
FSC® Certification 606.2(3) Wood or wood-based products available that are certified by Forest Stewardship Council™.
Other Certification 606.2(6) Wood-based components certified in accordance to CPA ECC 4-11.
Low Formaldehyde/VOC Emissions 901.4(a) In compliance with ANSI A208.1.
Low Formaldehyde/VOC Emissions 901.4(c) In compliance with CPA ECC 4-11.

CARB Credits Description
California Air Resource Board C.A.R.B. In compliance with CARB phase 2 requirements.

Safety & Sustainability

Formaldehyde Emissions

Complies with California Air Resources Board (CARB) Phase 2 formaldehyde emission standards.

Warning

This particleboard contains low fuming urea formaldehyde resin and may release formaldehyde vapors in low concentrations. Formaldehyde vapors can be potentially irritating to the eyes and upper respiratory system. Should irritation develop, consult your physician.

Specifications

More Composite Panels More Particleboard

© 2017 Georgia-Pacific Gypsum LLC and Georgia-Pacific Wood Products LLC. All rights reserved.