|Averages1,2||3/8" to 1/2"||> 1/2" to < 1"||≥ 1|
|MOR-Modulus of Rupture (psi)||1885||1885||1885|
|MOE-Modulus of Elasticity (kpsi)||290.1||290.1||290.1|
|IB-Internal Bond (psi)||90||80||75|
|Face Screw Holding Capacity (lbs)||202||202||202|
|Edge Screw Holding Capacity (lbs)||NA||1803||180|
1. ≥ M-2
2. One-panel minimum average (ASTM D1037 / ANSI A208.1-2009)
3. Not applicable for thinner than 5/8"
|Length & Width||± 1/16"|
|Straightness||1/64" per 2 feet of length|
|Thickness (within panel)||± 0.004"|
|Thickness (panel to panel)||± 0.004"|
|Recycled Content||MR credit 4||Awards 1 or 2 points for using products with recycled content that constitute at least 10% or 20%, based on cost, of the total value of project materials.|
|Regional Materials||MR credit 5||Awards 1 or 2 points for using materials on a project that are extracted and manufactured within 500 miles that constitute at least 10% or 20%, based on cost, of the total value of project materials.|
|Environmental Quality||EQ credit 4.4||Composite wood panels on the project shall contain no urea formaldehyde resins.|
|Low-VOC Emmitting Materials||G2.9||Specifies architects to select low-VOC emitting materials.|
|National Green Building Standard||Credits||Description|
|Pre-Consumer Recycled Content||604.1(2)||Use recycled content products in major areas such as walls, floor, insulation and roofing.|
|FSC® Certification||606.2(3)||Wood or wood-based products available that are certified by Forest Stewardship Council™.|
|Other Certification||606.2(6)||Wood-based components certified in accordance to CPA ECC 4-11.|
|Low Formaldehyde/VOC Emissions||901.4(a)||In compliance with ANSI A208.1.|
|Low Formaldehyde/VOC Emissions||901.4(c)||In compliance with CPA ECC 4-11.|
|Low Formaldehyde/VOC Emissions||901.4(d)||Composite wood contains no urea formaldehyde.|
|California Air Resource Board||C.A.R.B.||Approved NAF exemption, exceeding requirements of CARB, Phase 2.|
Georgia-Pacific offers a choice of product solutions to meet customer design challenges: TemStock S™ Particleboard, TemStock W™ and TemStock B™ Particleboards are value engineered to produce premium results based on the qualities of Strength, Weight and Balance.
UltraStock MDF offers a specialized selection of panels designed for machinability, performance and weight. Enhanced options also deliver moisture protection and a product with no added formaldehyde resins.
TemStock S particleboard is value engineered for strength while providing exceptional surface smoothness for even the thinnest laminates.
TemStock B particleboard is value engineered for balance. TemStock-B delivers a good balance of performance and productivity.
TemStock W particleboard is value engineered for weight. When the objective is delivering lightweight component parts or finished products, TemStock-W offers weight savings.
When an industrial or commercial application calls for fire resistance, TemStock FR particleboard delivers.
TemStock MR is designed specifically for cabinets and fixtures with an elevated risk of exposure to liquids and high humidity.
TemStock FREE offers designers, specifiers and manufacturers particleboard with no added urea formaldehyde resins and emission levels more than three times lower than CARB Phase 2 standards.
Engineered to provide the highest MOE, MOR and IB values of any of our particleboard panels, TemStock M3i is especially well suited for demanding furniture applications.
Shelving manufactured with Georgia-Pacific particleboard or MDF is designed for compatibility with a wide range of easily available shelf brackets and supports.