DensArmor Plus® Fireguard® Impact-Resistant Interior Panel is a mold-resistant1 interior gypsum wallboard featuring fiberglass mats on the front and back and an embedded mesh for the ultimate performance. Moisture- and mold-resistant, DensArmor Plus Impact-Resistant Panel is formulated for ultra-high traffic areas such as corridors in healthcare facilities, schools and correctional institutions, or where abuse may be intentional rather than accidental. Surface Abrasion: Level 3 Tested in accordance with ASTM C1629. Surface Indentation: Level 1 Tested in accordance with ASTM C1629. Soft-body Impact: Level 3 Tested in accordance with ASTM C1629. Hard-body Impact: Level 2 Tested in accordance with ASTM C1629. Dens® Solutions are industry trusted, high-performing fiberglass mat gypsum panels suitable for your wall, roof, ceiling and floor projects. Dens Solutions carry the mark of our valued heritage in Gold as a visible standard-bearer of our position as the first manufacturer to create a fiberglass mat board and as a relentless innovator of strength and moisture resistant products for over 30 years. Dens Solutions answer building challenges with ingenuity.
1When tested as manufactured in accordance with ASTM D3273, DensArmor Plus Interior Panels have scored a 10, the highest level of performance for mold resistance under the ASTM D3273 test method, a testing method set by ASTM International, which develops testing guidelines and procedures for building materials, products, systems and services. The score of 10 in the ASTM D3273 test indicates no mold growth in a 4-week controlled laboratory test. In addition, the mold resistance of DensArmor Plus Interior Panels have been validated by UL Environment and listed in its Sustainable Product Guide utilizing microbial resistant testing based on ASTM Standard D6329-98. The mold resistance of any building product when used in actual job site conditions may not produce the same results as were achieved in the controlled, laboratory setting. No material can be considered mold proof. When properly used with good design, handling and construction practices, DensArmor Plus Interior Panels provide increased mold resistance compared to standard paper-faced gypsum products. For additional information, visit our Product Fire, Safety and Use Information page.
Increased impact-resistance for ultra-high traffic areas
Greater moisture resistance due to glass-mat facing
Ideal for specialty commercial pre-rock installations
nominal: 5/8″ (15.9 mm) ± 1/64″ (0.4 mm)
nominal: 4′ (1219 mm) ± 3/32″ (2.4 mm)
standard: 8′ (2438 mm), 10′ (3048 mm), 12′ (3658 mm) ± 1/4″ (6.4 mm)
lbs/sq. ft. nominal (kg/m²): 3.0 (14.6)1
°F•ft2•hr/BTU (m2•K/W): 0.67 (0.118)2
≤1/8″ (3 mm)3
1Represents approximate weight for design and shipping purposes. Actual weight may vary depending on manufacturing location and other factors. 2Tested in accordance with ASTM C518 3Tested in accordance with ASTM C473
Certifications may vary by production location, please contact local representative for more information.