Georgia-Pacific MDF Shelving Board, Particleboard Shelving Lumber

Shelving

  • Pre-cut in popular widths and lengths
  • Ideal for painting or laminating
  • Available in high-quality GP particleboard or MDF
Your best storage solution starts here.

Wherever storage is needed, Georgia-Pacific has particleboard or MDF shelving for retail applications, pantries, garages, bedrooms and other residential and commercial areas.

Pre-cut in popular widths and lengths, our particleboard or MDF is designed for compatibility with a wide range of easily available shelf brackets and supports. Plus, it’s ideal for laminating or painting.  No wonder our products give “shelf life” a new meaning.

TOOLS

Pre-cut in three popular widths and four lengths

EASE OF USE

Produced raw, ideal for painting or laminating

ASSEMBLY

Square or bull-nosed

WARRANTY

Cost efficient, easy to install and durable

SUBMITTALS

Wherever storage is needed, including the pantry, garage, bedroom and stud

ENERGY EFFICIENT

CARB and EPA TSCA, Title VI Compliant

SPECS

Dimensions
Thicknesses
1/4” –  1-1/8”
Panel Sizes
49” & 61” x 73”-169”
Press Sizes
4’ x 24’,  9’ x 25’
Physical Properties
Thickness
3/4”
Lengths
4’, 6’, 8’ & 12’
Widths
12”, 16”, 24”
Edge
Square and Bullnose
Bundles
4’ wide, 2’ high

*Actual sizes are 1/2” under. Custom sizes available with appropriate lead time and volume.

Tolerances
Length & Width
± 1/16”
Squareness
< 1/8”
Straightness
± 1/64” per 2 ft. of length
Thickness (within panel)
± 0.004”
Thickness (panel to panel)
± 0.004”
Environmental Credits
Recycled Content (MR credit 4)
Awards 1 or 2 points for using products with recycled content that constitute at least 10% or 20%, based on cost, of the total value of project materials.
Regional Materials (MR credit 5)
Awards 1 or 2 points for using materials on a project that are extracted and manufactured within 500 miles that constitute at least 10% or 20%, based on cost, of the total value of project materials.
Environmental Quality (EQ credit 4.4)
Requires composite wood products used on project to demonstrate documented compliance with California Air Resources Board ATCM formaldehyde requirements for ultra-low-emitting formaldehyde (ULEE) resins or no-added-formaldehyde (NAF) resins.
Low-VOC Emitting Materials (G2.9)
Specifies architects to select low-VOC emitting materials
Pre-consumer Recycled Content (604.1(2))
Use recycled content products in major areas such as walls, floor, insulation and roofing.
FSC® Certification (606.2(3))
Wood or wood-based products available that are certified by Forest Stewardship Council™.
Other Certification (606.2(6))
Wood-based components certified in accordance to CPA ECC 4-11.
Low Formaldehyde/VOC Emissions (901.4(a))
In compliance with ANSI A208.1.
Low Formaldehyde/VOC Emissions (901.4(c))
In compliance with CPA ECC 4-11.
Low Formaldehyde/VOC Emissions (901.4(d))
Composite wood contains no urea formaldehyde.
Certifications
ECC CERTIFICATION

Georgia-Pacific MDF shelving products produced at Mt. Jewett, Pennsylvania, have been awarded the Composite Panel Association (CPA) Eco-Certified Composite (ECC) grademark which verifies compliance with the CPA 4-11 ECC Sustainability Standard, the California Air Resources Board (CARB) Airborne Toxic Control Measure (ATCM) 93120 and the EPA TSCA Title VI rule.

Georgia-Pacific particleboard shelving products produced in the Georgia-Pacific facilities at Monroeville, Alabama, Hope, Arkansas, Thomson, Georgia, and Diboll, Texas, have been awarded the Composite Panel Association (CPA) Eco-Certified Composite (ECC) grademark.

ECC Eco-Certified Sustainable Use of Wood Fiber
FSC® CERTIFICATION

Georgia-Pacific MDF that is certified to conform to the requirements of Forest Stewardship Council® standards for FSC Mix Chain of Custody and Controlled Wood manufacturing is available by special order.

 

Particleboard that is certified to conform to the requirements of Forest Stewardship Council® standards for Reclaimed Material Chain of Custody and Controlled Wood manufacturing is available by special order from Georgia-Pacific facilities in Monroeville, Alabama, Hope, Arkansas, Thomson, Georgia, and Diboll, Texas.

FSC Certified Building Products

Warning:

This particleboard contains low fuming urea formaldehyde resin and may release formaldehyde vapors in low concentrations. Formaldehyde vapors can be potentially irritating to the eyes and upper respiratory system. Should irritation develop, consult your physician.

PRODUCT RESOURCES

TECHNICAL DOCUMENTS