Georgia-Pacific TemStock Particleboard

TemStock MR® Particleboard

  • Moisture resistant particleboard
  • Increased protection from liquids and moisture without sacrificing performance
  • Can be machined, drilled and laminated
Moisture-resistant performance meets the challenge.

TemStock MR particleboard is designed specifically for cabinets and fixtures with an elevated risk of exposure to liquids, moisture and high humidity. You get the protection – but you also get the performance.  TemStock particleboard solutions are value engineered to meet customer design challenges on the production line and in a range of end-use applications. Whether machined, drilled or laminated, TemStock is a lock for your particleboard needs.

Designed for cabinets and fixtures with an elevated risk of exposure to liquids and high humidity.

TemStock MR is CARB and EPA TSCA, Title VI Compliant

SPECS

Dimensions
Thicknesses
1/4” –  1-1/8”
Panel Sizes
49” x  73”- 169”
Average Physical Properties Tested (1,2)
<3/8”                     3/8” to 1/2”        > 1/2” to <1”                     >1”
MOR-Modulus of Rupture (psi)
 1885                        1885                         1885                            1885
MOE-Modulus of Elasticity (kpsi)
290.1                        290.1                      290.1                            290.1
IB-Internal Bond (psi)
  100                            90                            80                                75
Face Screw Holding Capacity (lbs)
  202                           202                          202                             202
Edge Screw Holding Capacity (lbs)
  NA                             NA                          1803                            180
Formaldehyde Emission CARB II and TSCA Title VI Compliant
     √                                √                                √                              √
24-Hour Thickness Swell (4)
 14.0%                         7.0%                       4.0%                            4.0%
FREE Designation
     √                                √                                √                              √
  1. ≥ M-2
  2. One-panel minimum average (ASTM D1037 / ANSI A208.1-2016)
  3. 5/8″ and thicker
  4. One-panel maximum average (ASTM D1037 / ANSI A208.1-2016)
Tolerances
Length & Width
± 1/16”
Squareness
< 1/8”
Straightness
± 1/64” per 2 ft. of length
Thickness (within panel average)
± 0.004”
Thickness (panel to panel average)
± 0.004”
Environmental Credits
Recycled Content (MR credit 4)
Awards 1 or 2 points for using products with recycled content that constitute at least 10% or 20%, based on cost, of the total value of project materials.
Regional Materials (MR credit 5)
Awards 1 or 2 points for using materials on a project that are extracted and manufactured within 500 miles that constitute at least 10% or 20%, based on cost, of the total value of project materials.
Environmental Quality (EQ credit 4.4)
Requires composite wood products used on project to demonstrate documented compliance with California Air Resources Board ATCM formaldehyde requirements for ultra-low-emitting formaldehyde (ULEE) resins or no-added-formaldehyde (NAF) resins.
Low-VOC Emitting Materials (G2.9)
Specifies architects to select low-VOC emitting materials
Pre-consumer Recycled Content (604.1(2))
Use recycled content products in major areas such as walls, floor, insulation and roofing.
FSC® Certification (606.2(3))
Wood or wood-based products available that are certified by Forest Stewardship Council™.
Other Certification (606.2(6))
Wood-based components certified in accordance to CPA ECC 4-11.
Low Formaldehyde/VOC Emissions (901.4(a))
In compliance with ANSI A208.1.
Low Formaldehyde/VOC Emissions (901.4(c))
In compliance with CPA ECC 4-11.
Low Formaldehyde/VOC Emissions (901.4(d))
Composite wood contains no urea formaldehyde.
Certifications
ECC CERTIFICATION

TemStock particleboard products produced in the Georgia-Pacific facilities at Monroe-

ville, Alabama, Hope, Arkansas, Thomson, Georgia, and Diboll, Texas, have been awarded the Composite Panel Association (CPA) Eco-Certified Composite (ECC) grademark.

ECC Eco-Certified Sustainable Use of Wood Fiber
FSC® CERTIFICATION

Particleboard that is certified to conform to the requirements of Forest Stewardship Council® standards for Reclaimed Material Chain of Custody and Controlled Wood manufacturing is available by special order from Georgia-Pacific facilities in Monroeville, Alabama, Hope, Arkansas, Thomson, Georgia, and Diboll, Texas.

FSC Certified Building Products
EPA TSCA, TITLE VI

TemStock S Particleboard is CARB and EPA TSCA Title VI compliant. Panels are available with either a ULEF or FREE designation.

Warning:

This particleboard contains low fuming urea formaldehyde resin and may release formaldehyde vapors in low concentrations. Formaldehyde vapors can be potentially irritating to the eyes and upper respiratory system. Should irritation develop, consult your physician.

 

PRODUCT RESOURCES

TECHNICAL DOCUMENTS