UltraStock Premium MDF Boards
UltraStock Premium MDF Panels
Georgia Pacific UltraStock MDF board

UltraStock® Premium MDF

  • Cuts and routes cleanly
  • Ideal for decorative edge profiles and intricate contours deep in the core
  • Can be painted, printed, stained, veneered or laminated
The super-refined high-volume performer.

There are panels – and there are premium panels.  Our UltraStock® MDF products are manufactured with 100% NAF resins to provide optimized panel solutions for a wide selection of performance characteristics. The technology combines refined fiber resources with a proven production process to produce panels for jobs that demand efficient machinability, top-grade finishing characteristics and high-volume performance.

Cuts and routes cleanly.

Manufactured with 100% NAF resin.

Decorative edge profiles and intricate contours deep in the core are easily produced.

Can be painted, printed, stained, veneered or laminated with excellent results.

Machined edges are smooth and perform equally well for wet or dry film edge finishing.

Features MR10 thickness-swell, moisture-resistance designation.

Moulding and millwork, furniture, RTA furniture, cabinets, store fixtures and laminate flooring

All UltraStock MDF panels are recognized by the California Air Resources Board (CARB) as no added formaldehyde (NAF) products by Executive Order N-15-021a

SPECS

Dimensions
Thicknesses

1/4” –  1-1/2”

Widths

To 5’

Lengths

To 16’

Physical Properties
Min Panel Averages (1)
< 3/8”          3/8” to <1/2”          1/2” to 3/4”              >3/4”
MOR-Modulus of Rupture (psi)
4050                   3130                          3130                    3130
MOE-Modulus of Elasticity (kpsi)
405                      313                             313                     313
IB-Internal Bond (psi)
110                      100                             90                        85
Face Screw Holding Capacity (lbs)
235                      235                             235                     235
Edge Screw Holding Capacity (lbs) (2)
NA                       NA                               215                     205
Formaldehyde Emissions - CARB II Compliant
✔                        ✔                                ✔                        ✔
24-Hour Thickness Swell
≤0.065%            ≤0.065%                    <5.5%                 <5.5%
  1. One-panel minimum average per ANSI 208.2
  2.  Not applicable for thinner than 5/8”
Tolerances
Length & Width

± 1/16” per panel

Squareness

± 1/64” per ft. of length

Straightness

± 1/64” per ft. of length

Thickness (within panel)

± 0.005”

Thickness (panel to panel)

± 0.005”

Environmental Credits
Recycled Content (MR credit 4)
Awards 1 or 2 points for using products with recycled content that constitute at least 10% or 20%, based on cost, of the total value of project materials.
Regional Materials (MR credit 5)
Awards 1 or 2 points for using materials on a project that are extracted and manufactured within 500 miles that constitute at least 10% or 20%, based on cost, of the total value of project materials.
Environmental Quality (EQ credit 4.4)
Requires composite wood products used on project to demonstrate documented compliance with California Air Resources Board ATCM formaldehyde requirements for ultra-low-emitting formaldehyde (ULEE) resins or no-added-formaldehyde (NAF) resins.
Low-VOC Emitting Materials (G2.9)
Specifies architects to select low-VOC emitting materials
Pre-consumer Recycled Content (604.1(2))
Use recycled content products in major areas such as walls, floor, insulation and roofing.
FSC® Certification (606.2(3))
Wood or wood-based products available that are certified by Forest Stewardship Council™.
Other Certification (606.2(6))
Wood-based components certified in accordance to CPA ECC 4-11.
Low Formaldehyde/VOC Emissions (901.4(a))
In compliance with ANSI A208.1.
Low Formaldehyde/VOC Emissions (901.4(c))
In compliance with CPA ECC 4-11.
Low Formaldehyde/VOC Emissions (901.4(d))
Composite wood contains no urea formaldehyde.
CERTIFICATIONS
ECC CERTIFICATION

UltraStock MDF products produced in the Georgia-Pacific facility in Mt. Jewett, Pennsylvania, have been awarded the Composite Panel Association (CPA) Eco-Certified Composite (ECC) grademark which verifies compliance with the CPA 4-11 ECC Sustainability Standard, the California Air Resources Board (CARB) Airborne Toxic Control Measure (ATCM) 93120 and the EPA TSCA Title VI rule.

ECC Eco-Certified Sustainable Use of Wood Fiber
FSC® CERTIFICATION

UltraStock MDF that is certified to conform to the requirements of Forest Stewardship Council® standards for FSC Mix Chain of Custody and Controlled Wood manufacturing is available by special order.

FSC Certified Building Products
MR10 Designation

Based on ANSI A208.2-2016 section 3.6, to receive the MR10 designation product samples must demonstrate the 24-hour thickness swell test value of 5.5% or less.

EPA TSCA, TITLE VI

All UltraStock MDF is CARB and EPA TSCA Title VI compliant. This product contains no added formaldehyde.

PRODUCT RESOURCES

TECHNICAL DOCUMENTS