Georgia-Pacific TemStock Particleboard

TemStock FR® ULEF

TemStock FR® ULEF

  • For use in applications where a Class 1 fire rating is desired
  • Excellent substrate for wood veneers, high and low pressure laminates and vinyl overlays.
  • May be cut, machined or drilled without significant effect on its flame spread rating
When it comes to fire resistance, think TemStock FR.

When an industrial or commercial application calls for fire resistance, TemStock FR particleboard delivers. Value engineered to meet customer design challenges on the production line and in a range of end-use applications, TemStock FR works equally well with wood veneers, high- and low-pressure laminates and vinyl overlays. If you want a Class 1 fire rating, go to the head of the class with TemStock FR.

Excellent substrate for wood veneers, high and low pressure laminates and vinyl overlays.

May be cut, machined or drilled without significant effect on its flame spread rating

Wall systems, fixtures, cabinets or furniture for industrial or commercial applications where a Class 1 fire rating is desired.

TemStock FR is CARB and EPA TSCA, Title VI Compliant

SPECS

Dimensions
Thicknesses

3/8” – 1”

Panel Sizes

49” x 73”- 144”

Press Sizes

4’ x 24’

Average Physical Properties Tested (1)
3/8” – <5/8”           5/8” – 3/4”          ≥ 3/4”
MOR-Modulus of Rupture (psi)
     1600                        1400                 1400
MOE-Modulus of Elasticity (kpsi)
      290                           270                  270
IB-Internal Bond (psi)
       80                             70                     55
Face Screw Holding Capacity (lbs)
      225                           225                   225
Edge Screw Holding Capacity (lbs)
       NA                           1602                  1602
Formaldehyde Emission – CARB II and TSCA Title VI Compliant
          √                              √                        √
Flame Spread (3)
See Note 3              See Note 3          See Note 3
Smoke Developed (3)
See Note 3              See Note 3          See Note 3
FREE Designation
          √                              √                        √
  1. One-panel minimum average (ASTM D1037 / ANSI A208.1-2016)
  2. 5/8” and thicker
  3. Underwriters Laboratories, Inc. Classified Wood Particleboard: Surface Burning Characteristics. UL 723-Class 1 or ASTM E-84 Class A.
Tolerances
Length & Width
± 1/16”
Squareness
< 1/8”
Straightness
± 1/64” per 2 ft. of length
Thickness (within panel average)
± 0.004”
Thickness (panel to panel avearage)
± 0.004”
Environmental Credits
Recycled Content (MR credit 4)
Awards 1 or 2 points for using products with recycled content that constitute at least 10% or 20%, based on cost, of the total value of project materials.
Regional Materials (MR credit 5)
Awards 1 or 2 points for using materials on a project that are extracted and manufactured within 500 miles that constitute at least 10% or 20%, based on cost, of the total value of project materials.
Environmental Quality (EQ credit 4.4)
Requires composite wood products used on project to demonstrate documented compliance with California Air Resources Board ATCM formaldehyde requirements for ultra-low-emitting formaldehyde (ULEE) resins or no-added-formaldehyde (NAF) resins.
Low-VOC Emitting Materials (G2.9)
Specifies architects to select low-VOC emitting materials
Pre-consumer Recycled Content (604.1(2))
Use recycled content products in major areas such as walls, floor, insulation and roofing.
FSC® Certification (606.2(3))
Wood or wood-based products available that are certified by Forest Stewardship Council™.
Other Certification (606.2(6))
Wood-based components certified in accordance to CPA ECC 4-11.
Low Formaldehyde/VOC Emissions (901.4(a))
In compliance with ANSI A208.1.
Low Formaldehyde/VOC Emissions (901.4(c))
In compliance with CPA ECC 4-11.
Low Formaldehyde/VOC Emissions (901.4(d))
Composite wood contains no urea formaldehyde.
CERTIFICATIONS
ECC CERTIFICATION

TemStock particleboard products produced in the Georgia-Pacific facilities at Monroe-

ville, Alabama, Hope, Arkansas, Thomson, Georgia, and Diboll, Texas, have been awarded the Composite Panel Association (CPA) Eco-Certified Composite (ECC) grademark.

ECC Eco-Certified Sustainable Use of Wood Fiber
FSC® CERTIFICATION

Particleboard that is certified to conform to the requirements of Forest Stewardship Council® standards for Reclaimed Material Chain of Custody and Controlled Wood manufacturing is available by special order from Georgia-Pacific facilities in Monroeville, Alabama, Hope, Arkansas, Thomson, Georgia, and Diboll, Texas.

FSC Certified Building Products
EPA TSCA, TITLE VI

TemStock S Particleboard is CARB and EPA TSCA Title VI compliant. Panels are available with either a ULEF or FREE designation.

Warning:

This particleboard contains low fuming urea formaldehyde resin and may release formaldehyde vapors in low concentrations. Formaldehyde vapors can be potentially irritating to the eyes and upper respiratory system. Should irritation develop, consult your physician.

PRODUCT RESOURCES

TECHNICAL DOCUMENTS
SAFETY DATA SHEETS