Georgia-Pacific TemStock Particleboard

TemStock W® Particleboard

  • Value engineered for reduced weight
  • Up to 10 percent lighter than standard particleboard
  • Helps minimize machine and tool wear
Lightweight partner. Heavyweight performance.

When you want lightweight component parts or finished products, TemStock W panels offer weight-savings that deliver. Up to 10% lighter than standard particleboard,

TemStock W is value-engineered to reduce weight, thus helping to minimize machine and tool wear. To make light work of your next project, do what the pros do and turn to TemStock W.

Lightweight home and office furniture, shelving and kitchen cabinets, as well as commercial and institutional fixtures

TemStock W is CARB and EPA TSCA, Title VI Compliant

SPECS

Dimensions
Thicknesses

1/4” –  1-1/8”

Panel Sizes

49” & 61” x 73”- 169”, countertops and shelving available

Press Sizes

4’ x 24’,   9’ x 25’

Average Physical Properties Tested (1,2)
<3/8”               3/8” to 1/2”        > 1/2” to <1”             >1”
MOR-Modulus of Rupture (psi)
 1450                     1450                       1450               1450
MOE-Modulus of Elasticity (kpsi)
246.6                     246.6                      246.6              246.6
IB-Internal Bond (psi)
  80                         70                            70                     65
Face Screw Holding Capacity (lbs)
  180                       180                         180                  180
Edge Screw Holding Capacity (lbs)
  NA                        NA                           1403                140
Formaldehyde Emission CARB II and TSCA Title VI Compliant
      √                         √                                √                      √
ULEF Designation
      √                         √                                √                      √
FREE Designation
      √                         √                                √                      √
  1. ≥ M-1
  2. One-panel minimum average (ASTM D1037 / ANSI A208.1-2016)
  3. Not applicable for thinner than 5/8″
Tolerances
Length & Width

± 1/16”

Squareness

< 1/8”

Straightness

± 1/64” per 2 ft. of length

Thickness (within panel average)

± 0.004”

Thickness (panel to panel average)

± 0.004”

Environmental Credits
Recycled Content (MR credit 4)
Awards 1 or 2 points for using products with recycled content that constitute at least 10% or 20%, based on cost, of the total value of project materials.
Regional Materials (MR credit 5)
Awards 1 or 2 points for using materials on a project that are extracted and manufactured within 500 miles that constitute at least 10% or 20%, based on cost, of the total value of project materials.
Environmental Quality (EQ credit 4.4)
Requires composite wood products used on project to demonstrate documented compliance with California Air Resources Board ATCM formaldehyde requirements for ultra-low-emitting formaldehyde (ULEE) resins or no-added-formaldehyde (NAF) resins.
Low-VOC Emitting Materials (G2.9)
Specifies architects to select low-VOC emitting materials
Pre-consumer Recycled Content (604.1(2))
Use recycled content products in major areas such as walls, floor, insulation and roofing.
FSC® Certification (606.2(3))
Wood or wood-based products available that are certified by Forest Stewardship Council™.
Other Certification (606.2(6))
Wood-based components certified in accordance to CPA ECC 4-11.
Low Formaldehyde/VOC Emissions (901.4(a))
In compliance with ANSI A208.1.
Low Formaldehyde/VOC Emissions (901.4(c))
In compliance with CPA ECC 4-11.
Low Formaldehyde/VOC Emissions (901.4(d))
Composite wood contains no urea formaldehyde.
CERTIFICATIONS
ECC CERTIFICATION

TemStock particleboard products produced in the Georgia-Pacific facilities at Monroe-

ville, Alabama, Hope, Arkansas, Thomson, Georgia, and Diboll, Texas, have been awarded the Composite Panel Association (CPA) Eco-Certified Composite (ECC) grademark.

ECC Eco-Certified Sustainable Use of Wood Fiber
FSC® CERTIFICATION

Particleboard that is certified to conform to the requirements of Forest Stewardship Council® standards for Reclaimed Material Chain of Custody and Controlled Wood manufacturing is available by special order from Georgia-Pacific facilities in Monroeville, Alabama, Hope, Arkansas, Thomson, Georgia, and Diboll, Texas.

FSC Certified Building Products
EPA TSCA, TITLE VI

TemStock S Particleboard is CARB and EPA TSCA Title VI compliant. Panels are available with either a ULEF or FREE designation.

Warning:

This particleboard contains low fuming urea formaldehyde resin and may release formaldehyde vapors in low concentrations. Formaldehyde vapors can be potentially irritating to the eyes and upper respiratory system. Should irritation develop, consult your physician.

PRODUCT RESOURCES

TECHNICAL